Do all operators have to be trained?

According to regulations, each individual that operates mobile equipment must be trained and certified prior to operating the equipment in the workplace. This applies to experienced operators, new or part-time employees and contractors.

When do operators need re-training?

Most North American regulatory authorities mandate that an operator be re-trained and certified every three years. Re-training and certification is also required when:

What is criminal negligence?

The act of being criminally negligent is knowing that the task(s) or operation(s) performed is unsafe or against the regulatory requirements. In other words, recklessly acting without reasonable caution and putting another person at risk of injury or death.

What is the training standard?

Depending on the mobile equipment, the standards that are referred to by Regulations are the CSA and ANSI standards. (Canadian Standards Association and American National Standards Institute

What is due diligence?

Taking all reasonable care to protect the well being of employees or co-workers.

When does the operator need to inspect the equipment?

As per regulations, each and every operator, prior to operating the equipment, must conduct a pre-operational inspection. The pre-use inspection must be documented and retained by the company for a minimum of one year. The equipment should not be used if any items on the pre-use inspection indicate that the equipment is in an unsafe condition or that the equipment is not operating as per the conditions of the manufacturer.

When does the operator need to inspect the equipment?

As per regulations, each and every operator, prior to operating the equipment, must conduct a pre-operational inspection. The pre-use inspection must be documented and retained by the company for a minimum of one year. The equipment should not be used if any items on the pre-use inspection indicate that the equipment is in an unsafe condition or that the equipment is not operating as per the conditions of the manufacturer.

Can our company modify or repair our equipment?

The only personnel that should attempt to modify or repair the equipment is a mechanic certified by the manufacturer. Before any attempts are made by the company, ensure that you have documentation from the manufacturer stating the company can repair/modify the equipment.

Hands-On Trainer Training

Train The Trainer Course Delivery

Hands-On Trainer Training

Starting @ $235

Book Your Train The Trainer Training and Certification Today!

Need a hands on train the trainer certification course? Our program is Perfect for you. We help your company meet and exceed Manitoba safety workplace and health regulations without hassle or headache.

We specialize in on site train the trainer certification for clients across Manitoba.

TESTIMONIALS

DRU BAYER INDUSTRIAL FLUID CONSULTANTS

On-site Training Services has provided us with great quality services for the last few years. The trainer was thorough, reliable, friendly and professional. The best part is they come to us whenever we need them. I recommend On-site Equipment Trainers to anyone that wants their operators certified conveniently and without any complications.

We've used Onsite Trainers for the past 6 yeas. They make it very easy to access their courses by providing flexible time frames and a variety of different course options. They've provided our team with new skills and documented procedures. Thank you for all the courses, certifications and documents you've provided to our dealership over the past 6 years to keep everyone safe!

Kailee Poklitar

Mercedes-Benz Winnipeg

GEORGE ANSEEUW COMSTOCK CANADA

The courses have always been very professional and reputable. A certification from this group will get you recognized as being professional, and your operators will be much better for it and it will show others working in proximity what are safe operating procedures. I would indeed recommend this service to any business in need of certification.

ADOLF REGIER TERVITA CORPORATION

ROD PIZZEY ROSSDALE MACHINE

I was very satisfied!

Course Price Lists

Accounts

Free Trial

Projects

SSL

Storage

Domains

FORKLIFT TRAINER COURSE

$1499

Review Regulations

Review Company Polices

Discuss Due Diligence

Stability & Safe Operating Procedures

Onsite Practical Training

Trainer Evaluation

Request Here

ADDITIONAL TRAINER

$500

Add Additional Trainer(s)

Regulations and Company Polices

Discuss Due Diligence

Stability & Safe Operating Procedures

Onsite Practical Training

Trainer Evaluation

Request Here

CUSTOMIZE

Combine Courses and Customize to Your Needs

Regulations and Company Polices

Discuss Due Diligence

Stability & Safe Operating Procedures

Onsite Practical Training

Trainer Evaluation

Request Here

Forklift Certification

What’s in The Hands-On Trainer Training?

You get a nationally recognized trainer program for your in-house trainers. Training is in Winnipeg, Manitoba and surrounding cities and towns. Onsite train the trainer programs are always available. Take advantage wherever that may be. Whenever that may be…It’s up to you.

Train The Trainer Training in 4 simple steps!

Train The Trainer Training in 4 simple steps!
1. In person and onsite theory training
2. Our master trainer teaches your trainer to guide your staff on correct operating procedures and complete practical training and evaluations.
3. A skills test to assess your trainer’s competence.
4. After successful completion, Your Trainer will get a Trainer Certificate.

Forklift Trainer Certification Cost?

Our Training courses are competitively priced, so you see immediate value.
$1499 Blended online Forklift Trainer.
$500 each for extra courses.

The Trainer Compliance Kit

Includes all tests, Answer keys, and operator compliance evaluations.
Wallet-sized certifications
Wall-sized certificates
Documentation binder and/Walletcard Account.
Get operator training manuals at exclusive trainer prices when buying in bulk.

You get a FREE Smartcard account for your trainer. Store all your employee tickets in Walletcard with an ultra-low-cost subscription. You’ll get automatic reminders before its time to recertify.

Why Is This Right For My Organization?

This is the most practical and convenient choice you have for train the trainer program in Manitoba. It is perfect if you want to ensure safety and compliance in the workplace, while maximize your training dollars.

Better still, you don’t have to wait a month or more to get your training done. We offer all our training on demand. If a date is open and you want it, it is yours. Its that simple.

Instructor Course length?

It depends on the experience of your instructor and the size of the class. The training program can go from 1-2 days depending if you go with a full hands on program or with a blended online program. Your trainer can complete the online theory training as time permits. The trainer will come once theory is done to complete in person training and evaluations.

How Long Does A Forklift Trainer Certificate Last?

Inhouse Trainers recertify every three years. Our budget-friendly online refresher program is the perfect option to complete your trainer recertification. It’s excellent because You never have to leave the workplace. That means no flights. No hotels. No extra costs.

What Types of Train The Trainer Programs Do We Offer?

Material Handling Equipment:
1. Electric motor rider Trucks – Class I
2. Electric Narrow Aisle Truck – Class II
3. Electric motor Hand/Rider truck (Power Pallet Forklifts) Class III
4. Internal Combustion Engine Counterbalanced Truck (solid/Cushion tires) Class VI
5. Internal Combustion Engine Counterbalanced Truck (air-filled tires) Class V
6. Electric or Internal combustion engine tractors (solid/air-filled tires) Class VI
7. Rough Terrain Forklift Trucks Class VII

Aerial Lifts:

Aerial Work Platform/Scissor-lift

Aerial Boom lift/Articulating Boom-lift

Earth Moving Equipment

Skid Steer/Bobcat

Mini Excavator

Check Schedule

Our Courses